MK4+ Hybrid Charge Controller User Manual
14
4.4 Parameter Setting
The user can set the lighting output #1 and #2 control modes, and parameters,
by using the keypad and LCD screen. The available control options are: light
control on-voltage, light control off-voltage, and time control elapsed time hour
value.
When the user needs to modify any specific parameters, you will first access
the appropriate browsing window by pressing the up or down keys. When
you reach the specific window that you need, you will press “Enter” to access
that particular window’s functionality and settings. You will see that the word
“SET” will appear on the LCD screen when you have accessed the setting
mode. You can then modify parameters or status by pressing the up or down
keys.
If you don’t wish to save the modified parameters, just press “Esc” and
you will return to the browsing window without saving the modified parameters.
After setting the preferred parameters, press
the “Enter" key to save them and
return back to the browsing window.
