![background image](http://html1.mh-extra.com/html/marine-tech/seacraft-enc-ii/seacraft-enc-ii_quick-user-manual_1727361010.webp)
10
First steps - switching on and off:
Switching on the device
– press both buttons at the same time.
The device will also switch on when immersed in water min. 0.3 m (1 ft) deep.
Switching off the device
– You have to stop recording first. Then go to MENU (from main screen –press the top button 3
times, then press the bottom button once). When the
OFF
command is selected, press the lower button.
The device will switch off automatically when the diving depth is less than 0.5 m and recording is off (HOLD).
Modes of operation:
Normal operation mode
– Default mode after power on. The user sees the current dive parameters, may switch
recording ON (REC) and OFF (HOLD), enter settings and view the contents of the device’s internal memory.
Charging
mode
– After connecting the device to a power source, the charging screen appears. The buttons are inactive
in this mode. This mode will be terminated, when the battery is fully charged or the power source is disconnected.
Service mode
– When a software update was requested, the device switches to this mode. The screen is blank and the
LED above the display is blinking. This mode ends automatically after less than 3 minutes.
Содержание Seacraft ENC II
