21 ͏ �
22 ͏ �
23 ͏ �
051214 - REV. A
PAGE 7 0F 11
POSITION BARS ON RAILS
Move each bar into its correct
position, making sure that the cord
rests in the Jacks between each
bar.
Wrap the bar cord around the
Corner jacks at the treble end.
SECURE BARS TO RAIL
Once all the bars are in place, from the bass
end pull the cord taught (pulling evenly on each
end of the cord at the same time), loop the cord
around the corner jacks and hook the springs
together.
bass end close-up
FOLLOW SAME PROCEDURE FOR ACCIDENTAL BARS
The bars go over every resonator that is plugged.
When you look from the top you can see the floor through
the resonators without bars over them.
treble end close-up
corner jacks
rail jacks
tuning arch
treble end close-up
