04
05
Thank you for purchasing a Marey Power Pack. The Power Pack unvented
pressure system water heater is manufactured to the highest standards and has
been designed to meet all the latest relevant safety specifications.
This Power Pack water heater must be installed, commissioned and maintained by
a competent person. Please read and understand these instructions prior to
installing your Power Pack unvented pressure system water heater. Particular
attention should be paid to the section headed SAFETY.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning the use of the
appliance by a person responsible for their safety. Children should be supervised to
ensure that they do not play with the appliance.
Heater
Fixing screws and plugs
Installation and User Instructions
Connections:
Inlet / Outlet connection -1/2" BSP
Water entry point - bottom
Cable entry point - bottom/rear
Electrical:
Model numbers
7.0kW - 94 805 005
9.0kW - 94 805 006
Electrical rating................................................................. 6.4/7.0kW @ 230/240V
..........................................................................................8.3/9.0kW @ 230/240V
Rated Pressure:
7kW/9kW
Materials:
Back plate, cover - ABS
Element(s) - Copper sheathed rod type.
Dimensions:
Height - 8.27" - 210mm
Width - 6.30" - 160mm
Depth - 4.33" - 104mm
Standards and Approvals:
Complies with the requirement of UL.
Complies with European Community Directives (CE).
MODEL
TEMPERATURE RISE AT FLOW RATE IN U.S. GALLONS
A.C. ONLY
0.5 GPM
0,75 GPM
1.0 GPM
1.5 GPM
2.0 GPM
2.5 GPM
WATTS
VOLTS
AMPS
WIRE
SIZE
94 805
005
95º F
63º F
47º F
31º F
23º F
19º F
7000
240
29.2
8AWG
94 805
006
123º F
82º F
61º F
41º F
30º F
24º F
9000
240
37.5
6AWG
Fig. 01