Marey ECO240, Инструкция по эксплуатации

Страница: 7 / 11

12
Hold the back bracket hanger in position against the wall in the desired hanging
location. Check to make sure that the bracket is level. Mark the wall where the
three mounting holes should be located. Drill holes of ¼” diameter in the marked
locations. If you are on a stud, screw the bracket directly into the wall. If you are not
on a stud, insert the plastic anchor in the hole, and secure the bracket using the
screws supplied (Fig. 08).
Remove (4) screws and washers (Fig 09) from the unit to free the front cover.
Carefully lift the front cover off the unit a few inches. Disengage the plug
connecting the front cover LCD panel to the body of the unit (Fig 10). Remove the
cover completely.
Please note: If LCD connection cable cannot be disengaged, simply set the front
cover aside and keep the cable connected.
Fig. 08
Fig. 09
Fix the appliance to the hanging bracket. Make sure the unit is properly secured to
the bracket (See Fig. 11).
13
Fig. 10
Fig. 11