background image

VMM6 User’s Manual_________________________________________ 

17                                                                                                                         

VMM6 User’s Manual Rev.1.1 

 

 

Statements made by any person, including representatives of Carling, which are inconsistent or in conflict with the 
terms of this Limited Warranty, shall  not  be  binding  upon Carling unless reduced to  writing  and approved by an 
officer of Carling. 

IN NO CASE WILL CARLING BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, DAMAGES FOR 
LOSS OF USE, LOSS OF ANTICIPATED PROFITS OR SAVINGS, OR ANY OTHER LOSS INCURRED BECAUSE 
OF INTERRUPTION OF 

SERVICE. IN NO EVENT SHALL CARLING’S AGGREGATE LIABILITY EXCEED THE 

PURCHASE PRICE OF THE PRODUCT(S) INVOLVED. CARLING SHALL NOT BE SUBJECT TO ANY OTHER 
OBLIGATIONS  OR  LIABILITIES,  WHETHER  ARISING  OUT  OF  BREACH  OF  CONTRACT  OR  WARRANTY, 
TORT (INCLUDING NEGLIGENCE), OR OTHER THEORIES OF LAW WITH RESPECT TO PRODUCTS SOLD 
OR  SERVICES  RENDERED  BY  CARLING,  OR  ANY  UNDERTAKINGS,  ACTS  OR  OMISSIONS  RELATING 
THERETO. 

Carling does not warrant that the functions contained in any software programs or products will meet p

urchaser’s 

requirements or that the operation of the software programs or products will be uninterrupted or error free. Purchaser 
assumes responsibility for the selection of the software programs or products to achieve the intended results, and 
for the installation, use and results obtained from said programs or products. No specifications, samples, descriptions, 
or  illustrations provided Carling to  Purchaser, whether directly, in  trade literature, brochures or other documentation 
shall be construed as warranties of any kind, and any failure to conform with such specifications, samples, descriptions, 
or illustrations shall not constitute any breach of 

Carling’s limited warranty. 

 

 Warranty Return Procedure: 

To apply for warranty claims, contact Carling Technologies or one of its Maretron dealers to describe the problem 
and determine the appropriate course of action. If a return is necessary, place the product in its original packaging 
together  with  proof  of  purchase  and  complete  a  Return  Merchandise  Authorization  (RMA)  on  the  following  web 
page: 

https://www.maretron.com/rma_request.php 

You will be contacted by email with instructions on where to send the unit for repair / evaluation. You are 
responsible for all shipping and insurance charges. Carling will return the replaced or repaired product with all 
shipping and handling prepaid except for requests requiring expedited shipping (i.e., overnight shipments). Failure 
to follow this warranty return procedure could result in the product’s warranty becoming null and void. 

 

Carling reserves the right to modify or replace, at its sole discretion, without prior notification, the warranty listed 
above. To obtain a copy of the then current warranty policy for Maretron

® 

products, please go to the following 

web page: 

http://www.maretron.com/company/warranty.php 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание A3801-1






















Отзывы: