When pressing Accept, the display will show "--ºC". The data will be displayed on the watch
screen when the skin temperature and body temperature data are detected. If you want to
stop detection, swipe right to exit. In the app, you can check the historical data, including a
graphic.
3.14 Find phone
If the watch is paired with the phone, when you click "Find phone" on the watch, the phone
will vibrate and ring.
3.15 Settings
Screen brightness setting:
there are 5 levels of brightness, click the screen to adjust it.
QR code to download the app:
you can use your phone to scan this QR code in order to
download the latest version of the app.
Remote camera control:
if the watch is paired with the phone, when you click on the
camera function on the watch, a camera icon will appear on the watch and the phone's
camera will open. If you click on the camera icon on the watch, it will take a photo on
the phone and be automatically saved in the phone's photo album. On some phones, it
will be necessary to open the camera manually before using this function.
Reset:
tap the left icon to exit, and tap right icon to reset. Then all data of the watch
would be cleared. Note: the data of the paired phone will not be cleared unless the
phone is also reset.
About:
you can see the Mac address of the device, the bluetooth name, and the
firmware version.
4. Precautions
4.1 Only one smart watch pairing application should be installed on the phone to ensure that the
connection with the smart watch is normal. If several applications are connected, they can affect
the connection between the watch and the phone.
Note: Some Android phones will prompt you that you cannot install them. Please go to ‘settings’
of the phone and authorize the ‘Unknown source’.
4.2 When the mobile phone requests permissions, click "Allow". On the contrary, you may not
receive notifications, scan QR codes, open the remote camera or use other functions. These
permissions do not affect the flow of the phone or other information on the phone.
