Note: the received messages can be read on the smart watch, but they cannot be answered
from the watch and audios cannot be played.
3.8 Alarm clock (only set via APP)
The application supports setting a maximum of 5 alarms.
3.9 Remote music player
3.9.1 If the watch has not been paired with your phone, an ‘unconnected’ message will
pop up when you click the ‘Music’ icon, and it will automatically exit without any
actions after 2 seconds.
3.9.2 After pairing the watch with your phone, you can enter the music player function
of the watch to control the phone’s music player. There may be some compatibility
problems due to the variety of music players. Usually the watch can control your
phone’s music player directly, but some player may need to be opened manually before
been remotely controlled by the watch.
3.9.3 The watch can pause, play and switch to the previous or next song, but it does not
show the name of the song and cannot adjust the volume.
3.10 Pairing with QR code
In the application, select “Pair new device” to scan the QR code of the watch and thus link
with the phone. The "connection" icon in the watch's drop-down menu will appear blue if
the watch is connected. Each watch can only be connected with one phone.
3.11 Timer
Set target time, then click start icon. The message “timed out” will pop up on the screen and
the watch will vibrate.
3.12 Stop watch
Click start icon to start counting. Click the Pause icon to stop, click the clock icon to set a lap
time. If the counting is stopped, the clock icon will change to two arrows, if it is clicked, the
counting will stop and all records will be cleared. The watch keeps records of up to 20 lap
times.
3.13
Temperature
To take an accurate measurement, the smart watch must be worn for at least 15 minutes,
and the measurement must be done indoors in stable conditions (avoiding airstreams, air
conditioning and heating).
