Marcy ME-706, Руководство пользователя

Страница: 15 / 23

©IMPEX INC. www.marcypro.com 14
Error Message:
E1 (ERROR 1):
Normal state : During workout, when the monitor did not get the count signal from the gear motor more than 4 seconds and
check under successive 3 times then the LCD will show E1.
Power on state : The gear motor will return to zero automatically, when the signal of motor cannot be detected for more than
4 seconds then the gear motor’s driver will be cut off immediately and show the E1 on the LCD display. All
the other digital and function mark are blank, and the output signals are cut off also.
E2 (ERROR 2): When the monitor read the memory data, if the I.D. code is not correct or the memory IC damages then the
monitor will show E2 immediately at power on.
E3 (ERROR 3): After 4 seconds by start mode, the computer detects the faulty motor did not leave the zero point then the LCD
bar displays “E3”.
LCD Workout Graphics
PRESET PROGRAM PROFILES:
PROGRAM 1 PROGRAM 2 PROGRAM 3
MANUAL STEPS HILL
PROGRAM 4 PROGRAM 5 PROGRAM 6
ROLLING VALLEY FAT BURN
PROGRAM 7 PROGRAM 8 PROGRAM 9
RAMP MOUNTAIN INTERVALS
PROGRAM 10 PROGRAM 11 PROGRAM 12
RANDOM PLATEAU FARTLEK
PROGRAM 13
PRECIPICE
USER SETTING PROGRAM
PROGRAM 14
USER 1