Versa Electronics
www.MarCumtech.com
- 4 -
MENU OPTIONS
For ease of use, the menu system on the times out after a 5
second period of inactivity and defaults back to the camera image without
any additional keystrokes required.
Enter the Menu system with a single press of the top Menu/Enter button.
Use the Up or Down arrow buttons to navigate to the desired selection,
followed by the Enter button to enter and change that setting. Repeat this
process within the other menu sub-sections to make adjustments.
Monitor Setting
Brightness
- Controls the monitor backlight.
Sharpness
– Controls sharpness.
Contrast
– Controls Contrast.
Color
– Controls Color adjustments.
Color Kill
– Gathers a Black & White image.
OSD
– Set the on screen displays on or off.
Units
– Controls OSD displays in either standard or metric units.
NOTE
: Once the desired setting has been adjusted, press enter and
toggle down to the save button and press enter. You must save for changes
to take effect.
System Setting
Time – Set the current time
Date – Set the current date
Format – The micro-SD card must be formatted prior to recording media for
the first time. Once formatted, recording to the card is available. (See
“Formatting the micro-SD card”)
Default – Selecting “Yes” will restore the factory settings.
Version – Shows the current software version the system is operating with.
Calibrate – Select and follow instructions to calibrate the on screen displays
of depth, relative direction, and temperature (see “Calibration”)
Exit
Exit – This selection will exit user out of the Menu main page
FEATURES
Camera Lights
The is equipped with both LED and infrared lighting options.
Each lighting option has multiple intensity levels.
To turn on the LED lights, use the LED/UP button on the control panel.
Pressing this button once will turn the lights on. The on screen display will
show momentarily on the bottom of the monitor. To increase the intensity of
the lights, press the button until you reach the desired intensity level. There
are three settings available and the fourth press will turn the lights off.
The infrared lights offer a stealthy approach because infrared lights are not
visible to the eye. To turn on the infrared lights, use the IR/Down button on
the control panel. Pressing this button once will turn the lights on. An on
screen display will show momentarily on the bottom of the monitor. To
increase the intensity of the lights, press the button until you reach the
desired intensity level. There are three settings available and the fourth
