Marco ECOSMART PB10, Инструкция по эксплуатации

Страница: 4 / 12

HOW TO SETUP AN EcoSMART:
Smart Boiler (software 1.1)
Display main screen description
welcome screen
•
The welcome screen will appear after any reset of the machine (e.g. power-up, changing setup
values).
•
It will show the actual software version.
•
After few seconds the display will show the main screen:
main screen
•
Top part of the display always shows live read-out of the tank temperature (0.5°C accuracy).
•
Bottom part shows current machine status.
Entering Setup Mode
•
To enter setup mode press power and eco buttons on the front panel at the same time.
•
The display will show “USER SETUP” message:
•
Release the buttons now to enter the user setup mode.
•
To enter advanced settings keep the buttons pressed until the display shows “SERVICE
SETUP” message and release them.
•
In both setup modes use front panel buttons to navigate the settings:
o
power button to scroll through the functions,
o
eco button to increase set value (press and hold for auto-repeat).