Marco 1000674, Инструкция по эксплуатации

Страница: 4 / 12

1900051 REV.1
Page 4 of 12
Entering Setup Mode

To enter setup mode press power and eco buttons on the front panel at the same time.

The display will show “USER SETUP” message:

Release the buttons now to enter the user setup mode.

To enter advanced settings keep the button
s pressed until the display shows “SERVICE
SETUP” message and release them.

In both setup modes use front panel buttons to navigate the settings:
o
power button to scroll through the functions,
o
eco button to increase set value (press and hold for auto-repeat).
USER SET UP OPTIONS:
Screen view Description
Default
value
No. 1 Sets new tank temperature.
NOTE: Temperature should never be set for
more than 97°C because it may cause steam
to be generated during the low pressure days.
Range: 60
– 98.5 °C
Resolution: 0.5 °C
95.0
No. 2 Sets dispense time.
Range:
0
– 99.9 seconds (0.1 sec resolution)
100
– 600 seconds (1 sec resolution)
For PUSH & HOLD mode set to 0 (default).
00.0
No. 3 Sets number of pauses during time
dispense.
Range: 0
– 20
If machine set as PUSH & HOLD then number
of pauses has no impact on dispense.
00
No. 4. Sets pause time (same for each of the
pauses).
Range: 0
– 20.0 seconds
Resolution: 0.1 second
If machine set as PUSH & HOLD then time of
pause has no impact on dispense.
00.0
No. 5 Press the eco button to save all the
values and reset the machine.
-