9000 R Series IP Recorder with RAID Installation Guide
31
Unit Setup
Turning the Recorder On and Off
All models have power connectors on the back of the unit to plug in the two AC power cords (for
the redundant power supply).
There is also a power On/Off pinhole on the front of the recorder.
To turn the recorder off and on gracefully
1
Insert a paper clip into the power On/Off pinhole and press gently to power down the recorder
safely. Using the power On/Off pinhole ensures a graceful shutdown.
Note:
Wait for the front panel LEDs to turn off completely to indicate that the recorder is off.
2
To turn the recorder back on, insert a paper clip into the power On/Off pinhole and press
gently to power up the recorder safely.
The front panel LEDs allow you to monitor the recorder as it starts up.
To turn the recorder on and off
You can also turn the unit on or off by plugging in or unplugging both AC power cords. The
redundant power supply requires that both cords are connected. If only one is connected, an alarm
is triggered.
Power connectors on 2U models
Power connectors on 1U model
Power On/Off pin hole
LEDs are off
