Marathon MAGNUM ROUTER, Руководство пользователя

Страница: 67 / 171

Chapter 7: Magnum Router GUI Manager
___________________________________________________________________
7-23
If all data entered is correct, click on
Exit to close the DHCP screen. If not, correct the data and
click on Save again.
To disable the DHCP server, click on the box next to
Enable DHCP Server to remove the check
and click on Save .
Multiple IP Addresses
In the case where there are multiple IP addresses entered in the Ethernet Configuration screen,
and the DHCP server has already been configured then selecting an IP address that was not
originally selected for DHCP use will cause an error.
As shown below, there are 2 IP addresses entered in the Ethernet Configuration screen, and
172.16.1.5 is currently highlighted.
Selecting the
DHCP button will cause the following error (assuming that the DHCP server has
already been programmed to use the IP address of 10.1.100.250)