9
ENGLISH
BASIC OPERATIONS
1. TURNING ON THE POWER
POWER ON/STANDBY button
POWER ON
button
Press the POWER ON/STANDBY button on the unit or the POWER ON button on the remote
controller. The power to the unit is turned on and the STANDBY indicator on the front panel
goes off.
2. SELECTING THE INPUT SIGNAL
Select an input device that is connected to the unit.
INPUT buttons 1 to 6
INPUT
buttons 1
to 6
Press one of the INPUT buttons from 1 to 6 on the unit or the remote controller.
The input device corresponding to the number of the pressed button is selected and the indicator
on the button lights up in red.
3. SELECTING THE OUTPUT DEVICE
Select an output device that is connected to the unit.
OUTPUT buttons 1 and 2
OUTPUT
buttons 1
and 2
Press OUTPUT button 1 or 2 on the unit or the remote controller.
The output device corresponding to the number of the pressed button is selected and the
indicator on the front panel lights up in red.
Note:
When OUTPUT 1 (OUTPUT 2) is selected, video and audio are not output from OUTPUT 2
(OUTPUT 1).
4. TURNING OFF THE POWER
POWER ON/STANDBY button
STANDBY
button
Press the POWER ON/STANDBY button on the unit or the STANDBY button on the remote
controller.
The unit enters standby and the STANDBY indicator on the front panel lights up in red.
Notes:
• Do not pull out the power cord while the power to the unit is on. Doing so could cause a
malfunction.
• The power to the unit is not completely turned off while in standby. If you will not use the unit
for a long time, pull out the power cord from the outlet.
VS3002̲E̲01̲Eng.indd 9
VS3002̲E̲01̲Eng.indd 9
07.11.19 11:44:00 AM
07.11.19 11:44:00 AM
