background image

6

INTRODUCTION

ENGLISH

z

POWER ON key

Press to turn the projector on.

x

STANDBY key

Press to turn the projector off.

c

/

/

/

keys 

v

COMPONENT key

Select the COMPONENT VIDEO IN  signal.

b

S-VIDEO key

Select the S-VIDEO IN signal.

n

VIDEO key

Select the VIDEO IN signal.

m

RGB key

Select the RGB IN signal.

,

ENTER key

.

MENU key

Remote Controller

⁄0

THEATER key

Select the THEATER picture mode.
The key toggles between THEATER1, THEATER2, THEATER3
and THEATER STD.

⁄1

NORMAL key

Select the NORMAL picture mode.
The key toggles between NORMAL1, NORMAL2, NORMAL3
and NORMAL STD.

⁄2

DYNAMIC key 

Select the DYNAMIC picture mode.
The key toggles between DYNAMIC1, DYNAMIC2, DYNAMIC3
and DYNAMIC STD.

⁄3

OSD key

When the key is pressed, projector setting information is
displayed. Press again to display the FOCUS pattern. Then
press again to clear the FOCUS pattern.

⁄4

FULL key

Select FULL mode, from four aspect ratio mode.

⁄5

SQUEEZE key

Press to turn the SQUEEZE mode on and off. When the video
signal is squeezed, turn the SQUEEZE mode on. This mode is
intended to use with “Anamorphic” picture material. If you are
using an Anamorphically squeezed DVD or Laser Disc, this
mode will “unsqueeze” the image to give proper picture
geometry and enhanced resolution.

⁄6

2-3 P/D key

Press to turn the two to three pull down mode - automatic film
detection mode - on and off.

⁄7

4:3 key

Select a mode from four aspect ratio modes.

⁄8

ZOOM key

Select ZOOM mode from four aspect
ratio modes.

⁄9

B-LIGHT key

Press to turn on or off the back-lighting of keys on the unit.

¤0

P-SHIFT key

Press to turn the picture shift mode on or off. When adjusting
the image position vertically, use 

and 

keys. When

adjusting the image position horizontally, use 

and 

keys.

¤1

V-MUTE key

Mute the picture so that screen gets dark and no image is
displayed.

Note:

FULL key, SQUEEZE key, 4:3 key, ZOOM key, 2-3 P/D key,and
P-SHIFT key are available for only COMPONENT VIDEO IN, S-
VIDEO IN, VIDEO-IN, and RGB IN(VGA only).

STANDBY

POWER ON

2–3 P/D

B-LIGHT

P-SHIFT

V-MUTE

RC8000VP

ENTER

MENU

OSD

COMPONENT

VIDEO

RGB

THEATER

NORMAL

DYNAMIC

FULL

SQUEEZE

4 : 3

ZOOM

S-VIDEO

z

c

.

m

⁄2
⁄5
⁄8
¤1
⁄1
⁄4

x

v

n
⁄0
⁄3
⁄6
⁄9
⁄7
¤0

b

,

B

C

D

A

E

B

C

D

A

E

Содержание VP8100

























Отзывы: