T
roubleshooting
Information
HDMI Control F
unction
Playback
Connections
Getting Started
Specications
26
ENGLISH
HDMI Setup
Setting items
Setting contents
SA-CD Audio Out
Set to output stereo/multi
area audio of Super Audio
CD to the HDMI terminal.
On :
Super Audio CD audio is output.
Off :
Super Audio CD audio is not output.
The Super Audio CD audio signal is a 44.1 kHz/16-bit Linear PCM output.
HDMI Control
Can operate the unit in
conjunction with an HDMI
control support device.
G
Control
H
Off
•
:
Disable the HDMI control function.
HDMI1 On :
•
Link with the device connected to HDMI1.
HDMI2 On :
•
Link with the device connected to HDMI2.
G
Power Off Control
H
On
•
:
Turns the UD9004’s power to standby through linkage to the TV.
Off :
•
Does not turn the UD9004's power to standby through linkage to
the TV.
For the HDMI control function to operate, it is necessary for the UD9004
•
or HDMI-compatible TV connected to the UD9004 to have an HDMI
connection.
Refer to “HDMI Control Function” (
•
v
page 49) for more information
about the HDMI control function.
After the “HDMI Control” setting has been changed, always turn off the
•
power to the connected equipment and then turn it back on.
Setting items
Setting contents
TV Aspect (Aspect ratio)
Set the screen type and
display mode of the TV.
16:9 Squeeze Auto :
Output to a wide screen TV. For 4:3 video, display in
the center of the screen without changing the aspect ratio.
WIDE (16:9) :
Output to a wide screen TV.
4:3 PS :
Output to a 4:3 TV. For wide video, trim the left and right side of
the image and display in 4:3 aspect ratio.
z
1
4:3 LB :
Output to a 4:3 TV. Display all of the wide video.
z
2
Component Resolution
Set the component output
resolution.
480/576i
,
480/576P
,
720P
,
1080i
,
Source Direct :
Output video using its source resolution. Convert the
1080p video source to 1080i.
Progressive Mode
Set an appropriate progressive
conversion mode for the
source video material.
Auto :
Detect the type of video material and automatically switch the
mode. Normally, this setting is used.
Video1 :
Suitable for playing video material discs.
Video2 :
Suitable for playing video material discs or 30-frame lm material
discs.
TV Active Area
Sets the horizontal display
range when the analog
video output resolution is
480i/576i.
Full :
Set when a home-use monitor is connected.
Normal :
This setting is used when video synchronization is disturbed on
a professional-use monitor.
This is not available for HDMI output.
z
1 : Depending on the video content, even though you set the 4:3 PS (Pan Scan), the content may be
output in 4:3 LB (Letter Box).
z
2 : Only valid for content recorded in 480i/576i.
Set the video output signal according to the connected TV.
Video Setup
Default settings are underlined.
Setup
Remote control operation
buttons
SET UP
:
Displaying the menu
Cancel the menu
d f 0 1
:
Moves the cursor
(Up/Down/Left/Right)
ENTER
:Decision the setting
RETURN
:Return to previous menu
