Marantz SR8400 Скачать руководство пользователя страница 30

Страница: 30 / 52

ENGLISH

SPEAKER A/B

SR8400 has speaker system - A and speaker system-
B for front L/R channels.
You can select these systems by pressing

SPEAKERS A/B

button on the front panel or

SPK- AB

on the remote

7.1 CH INPUT.

The SR8400 is equipped for future expansion
through the use of Multi channel SACD multichannel
player or DVD-Audio player.
When this is selected, the input signals connected
to the L(front left), R (front right), CENTER, SL
(surround left), SR (surround right), SBL (surround
back left) and SBR (surround back right) channels
of the 7.1 CH. In jacks are output directly to the
front (left and right), center, surround (left and
right) and surround back speaker systems as well
as the pre-out jacks without passing through the
surround circuitry.
In addition, the signal input to the SW (subwoofer)
jack is output to the PRE OUT SW (subwoofer)
jack.
The video input source is selected in the SETUP
MAIN MENU to use this procedure. (Refer to 7.1
CH INPUT LEVEL, page 21)

Press the

7.1 CH INPUT

button on the front

panel or press

7.1CH

on the remote to switch

the 7.1 channel input.

RECORDING AN ANALOG SOURCE

In normal operation, the audio or video source
selected for listening through the SR8400 is sent to
the record outputs.
This means that any program you are watching or
listening to may be recorded simply by placing
machines connected to the outputs for

TAPE OUT,

CD-R/MD OUT, VCR1 OUT, and DSS/VCR2 OUT

in the record mode.

To record the input source signal you are
currently watching or listening to

Select the input source to record by pressing
the corresponding

input selector

button.

The input source is now selected and you may
watch or listen to it as desired.

The currently selected input source signal is
output to the

TAPE OUT , CD-R/MD OUT, VCR1

OUT, and DSS/VCR2 OUT

outputs for recording.

Start recording to the recording component as
desired.

Recording the video from one source and the
audio from another

You can add the sound from one source to the
video of another source to make your own video
recordings.
Below is an example of recording the sound from a
compact disc player connected to CD IN and the
video from a video camera connected to AUX IN to
video cassette recorder connected to the VCR1 OUT
jack.

Press the

AUX1

input source button to set

video output.

Press the

input source button to set audio

output.

Now “CD” has been selected as the audio
input source and “AUX1” as the video input
source.

Notes:

• If you change the input source during recording,

you will record the signals from the newly selected
input source.

• You cannot record the surround effects.

• Digital input signals are only output to the digital

outputs. There is no conversion from digital to
analog .

When connecting CD players and other digital
components, do not connect only the digital
terminals, but the analog ones as well.

HT-EQ

Press the

AMP

button and press the

button until

PAGE2 is displayed. Press the

HT-EQ (D5)

button

to turn on the HT-EQ mode.
The tonal balance of a film soundtrack will be
excessively bright and harsh when played back
over audio equipment in the home. This is because
film soundtracks were designed to be played back
in large movie theater environments.
Activating the HT-EQ feature when watching a film
made for movie theaters corrects this and restores
the correct tonal balance.

400

MEMORY

TUNING

MODE

CLEAR

DSS/VCR2

AUX1

VCR1

DVD

CD-R

TAPE

TUNER

7.1CH INPUT

AUX2

MULTI SPEAKER

MULTI

SPEAKERS A/B

F/P

AUX1

DSS

AMP

AUX2

AUX1

TAPE

TUNER

CD-R

VCR

DVD

LIGHT

Learning Remote Controller

RC1400

AUX1

8400

MEMORY

TUNING

MODE

CLEAR

DSS/VCR2

AUX1

VCR1

DVD

CD-R

TAPE

TUNER

7.1CH INPUT

AUX2

MULTI SPEAKER

MULTI

SPEAKERS A/B

F/P

DISP

MULTI

AUTO

TUNED

V – OFF

NIGHT

PEAK

ANALOG

DIGITAL

ATT

SLEEP

SURR

AUTO

DIRECT

DISC 6.1

MT X 6.1

SPKR A B

DIGITAL

SURROUND

PCM

LFE

AV SURROUND RECEIVER SR8400

SELECTOR

MEMORY

TUNING

CLEAR

POWER ON/STANDBY

PHONES

ENTER

STANDBY

SELECT

DSS/VCR2

AUX1

VCR1

DVD

MULTI SPEAK

MULTI

SPEAKERS A/B

If it is necessary to adjust the output level of
each channel, use “7.1 Ch. INPUT LEVEL” in
the OSD menu system as desired.
Adjust the speaker output levels so that you
can hear the same sound level from each
speaker at the listening position. For the front
left, front right, center, surround left, surround
right and surround back speakers, the output
levels can be adjusted between –10 to +10 dB.
The subwoofer can be adjusted between –15
and +10 dB.
These adjustments will be stored to 7.1 Ch.
INPUT memory. (see to page 21)

Adjust the main volume with the

MAIN VOLUME

knob or the

VOL

buttons on the remote.

To cancel the 7.1 Ch. INPUT setting, press the

7.1

CH INPUT

button on the front panel or press

7.1 CH

on the remote.

Notes:

• When the 7.1 Ch. Input is in use, you may not

select a surround mode, as the external decoder
determines processing.

• In addition, there is no signal at the record outputs

when the 7.1 Ch. Input is in use.

• SBL and SBR of the speaker terminals are emitted

n o s i g n a l w h e n t h e S U R R O U N D B A C K
SPEAKER is set NONE in SPEAKER SETUP
menu. (See SPEAKER SETUP, page 18)

AUX2 INPUT

If you don’t need to connect 7.1 Ch. input terminals
with multi channel decoder,
L(front left) and R (front right) inputs terminals are
available as AUX2 input.
In this case, You can connect additional audio
source to AUX2 as other audio input terminals.

MEMORY

TUNING

MODE

DSS/VCR2

AUX1

VCR1

DVD

CD-R

TAPE

TUNER

7.1CH INPUT

AUX2