English
General Information
❖
Playing CD-RW discs
This unit can play back the CD-RW (ReWritable) discs
as well as ordinary music CD and CD-R (Recordable)
discs.
• The CD-R and CD-RW discs should contain
properly-recorded TOC information so that they
can be played back. With the CD recorder system,
writing the TOC information in a disc is referred to
as finalizing the disc. A disc cannot be recognized
as a CD disc and played back unless it has been
finalized properly. For details, please read the
instruction manual provided with a CD recorder.
• TOC stands for Table Of Contents and contains
information such as the total number of tracks and
total playing time of the disc.
• This unit can play only the discs recorded in the
CD-DA format designed for music reproduction.
Do not attempt to play a disc containing other data,
such as a CD-ROM for PCs, on this unit.
• As the playback of a CD-RW disc necessitates
partial change of the player setup, it may take
longer time for reading the TOC information than
when a music CD or CD-R disc is played.
• A few CD-RW discs may not be played in some
reason. Please use another disc to play.
• Place the CD player on a firm, flat surface.
• Keep away from domestic heating equipment and
direct sunlight.
• In a cabinet, allow about 2 inches of free space all
around the player for adequate ventilation.
• If the CD player cannot read CDs correctly, use a
commonly-available cleaning CD to clean the lens
before taking the CD-player to be repaired. Other
cleaning methods may destroy the lens. Always
keep the tray closed to avoid dust on the lens.
• When it is moved from a cold to a warm environment,
allow the CD player to acclimatize for at least 2 hours
in order to avoid damage. When suddenly placed in
a warm environment, the lens may cloud over.
Playing an CD will not be possible then. Wait until
the moisture evaporates.
• Do not use the CD player under extremely damp
conditions.
• Do not expose discs to direct sunlight, high
humidity or high temperature for a long time.
Attention!
If the appliance is not used or operated in
accordance with the instructions, this may result
in exposure to dangerous radiation or other risks.
Only authorized technicians are allowed to open
the appliance casing or to perform repairs or
maintenance.
Placement
3
