Marantz PMD371 Скачать руководство пользователя страница 3

Страница: 3 / 35

This product was designed and manufactured to meet strict
quality and safety standards. There are, however, some
installation and operation precautions which you should be
particularly aware of.

1. Read Instructions –

All the safety and operating

instructions should be read before the product is operated.

2. Retain Instructions –

The safety and operating

instructions should be retained for future reference.

3. Heed Warnings –

All warnings on the product and in the

operating instructions should be adhered to.

4. Follow Instructions –

All operating and use instructions

should be followed.

5. Cleaning –

Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.

6. Attachments –

Do not use attachments not recommended

by the product manufacturer as they may cause hazards.

7. Water and Moisture –

Do not use this product near water-

for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool,
and the like.

8. Accessories –

Do not place this product on an unstable

cart, stand, tripod, bracket, or table. The product may fall,
causing serious injury to a child or adult, and serious
damage to the product. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or
sold with the product. Any mounting of the product should
follow the manufacturer’s instructions, and should use a
mounting accessory recommended by the manufacturer.

A product and cart combination should be

moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
product and cart combination to overturn.

10.Ventilation –

Slots and openings in the cabinet are

provided for ventilation and to ensure reliable operation of
the product and to protect it from overheating, and these
openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should not
be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.

11.Power Sources –

This product should be operated only

from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to your
home, consult your product dealer or local power company.
For products intended to operate from battery power, or
other sources, refer to the operating instructions.

12.Grounding or Polarization –

This product may be

equipped with a polarized alternating-current line plug (a
plug having one blade wider than the other). This plug will
fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarized plug.

13.Power-Cord Protection –

Power-supply cords should be

routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and
the point where they exit from the product.

14.Protective Attachment Plug –

The product is equipped

with an attachment plug having overload protection. This is
a safety feature. See Instruction Manual for replacement or
resetting of protective device. If replacement of the plug is
required, be sure the service technician has used a
replacement plug specified by the manufacturer that has
the same overload protection as the original plug.

15.Outdoor Antenna Grounding –

If an outside antenna or

cable system is connected to the product, be sure the
antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. See Figure 1.

FIGURE 1

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

IMPORTANT SAFETY

INSTRUCTIONS

READ BEFORE OPERATING EQUIPMENT

ANTENNA
LEAD IN WIRE

ANTENNA
DISCHARGE
UNIT(NEC
SECTION 810-20)

GROUNDING
CONDUCTORS
(NEC SECTION
810-21)

POWER SERVICE GROUNDING
ELECTRODE SYSTEM (NEC
ART 250, PART H)

GROUND
CLAMP

ELECTRIC SERVICE
EQUIPMENT