3
Features
1
2
3
3
4
6
5
5
7
7
7
8
8
8
9
11
10
1.
Power Input:
Use the included power adapter to connect this input to a power outlet.
Alternatively, install batteries in the battery compartment.
2.
Battery Compartment:
Remove the cover to this battery compartment to install 2 AA
batteries in it. Insert the positive (
+
) end of the battery first.
3.
Outputs:
Connect 1/4” (6.35 mm) stereo headphones to these outputs. Channel 1 can also
accept 1/8” (3.5 mm) stereo headphones.
Use the
Level
knobs to set the volume level of each output. The
Level
knob for Channel 1
will control the level of the 1/4” (6.35 mm)
and
1/8” (3.5 mm) outputs.
4.
Line Inputs:
Use standard XLR cables to connect your audio source to these inputs.
5.
Stereo
/
Loop In:
Use a standard 1/4” (6.35 mm) or 1/8” (3.5 mm) TRS cable to connect your
audio source to these inputs.
Alternatively, connect this input to the
Loop Out
of an additional PHA3. This lets you “daisy-
chain” multiple PHA3 units together. Use the included 1/4”-to-1/8” (6.35 mm to 3.5 mm) TRS
cable or a standard 1/4” (6.35 mm) TRS cable.
6.
Loop Out:
Connect this output to the
Loop In
of an additional PHA3. This lets you “daisy-
chain” multiple PHA3 units together. Use the included 1/4”-to-1/8” (6.35 mm to 3.5 mm) TRS
cable or a standard 1/4” (6.35 mm) TRS cable.
7.
Level:
Turn these knobs to set the volume level of each output. The
Level
knob for Channel 1
will control the level of the 1/4” (6.35 mm)
and
1/8” (3.5 mm)
outputs
.
8.
Peak LED:
These LEDs will light up when the signal of each output is “clipping” (distorting). If
this happens, turn the corresponding Level knob counterclockwise to reduce its level.
9.
Stereo
/
Mono:
Use this switch to set whether the outputs send a stereo signal or summed
mono signal.
10.
Power Switch:
Use this switch to power PHA3 on or off. To use the power adapter, set it to
Ext
. To use batteries, set it to
Batt
.
11.
Power LED:
This LED will light up when PHA3 is powered on.
Right Panel
Left Panel
Front Panel
Содержание PHA3
Страница 28: ...marantzpro com Manual Version 1 0...
