Marantz NR1608 страница 209 Скачать руководство пользователя

Страница: 209 / 284

Add New Feature

Display new features that can be downloaded to this unit and perform

an upgrade.

Upgrade Package:

Display the items to be upgraded.

Upgrade Status:

Display a list of the additional functions

provided by the upgrade.

Upgrade:

Execute the upgrade process.

When the upgrade starts, the menu

screen is shut down. During the upgrade,

the amount of upgrade time which has

elapsed is displayed.

Information regarding the “Update” function and “Add New Feature” will be

announced on the Marantz website each time related plans are defined. See

the Marantz website for details about upgrades.

When the procedure is complete, “Registered” is displayed in this menu and

upgrades can be carried out. If the procedure has not been carried out, “-------”

is displayed.

The ID number shown on this screen is needed when carrying out the

procedure.

The ID number can also be displayed by pressing and holding the main unit’s

STATUS and SOUND MODE for at least 3 seconds.

If the upgrade is not successful, “Upgrade Error” message appears in the

display. See “Troubleshooting” – “Update/upgrade error messages” for

information on upgrade error messages. (

p. 234)

Check the settings and network environment and then perform the upgrade

again.

This menu cannot be selected when “Allow Update” is set to “Off”.

Notes concerning use of “Update” and “Add New Feature”

In order to use these functions, you must have the correct system

requirements and settings for an Internet connection. (

p. 61)

Do not turn off the power until updating or upgrading is completed.

Approximately 1 hour is required for the updating/upgrading procedure

to be completed.

Once updating/upgrade starts, normal operations on this unit cannot

be performed until updating/upgrading is completed. Furthermore,

there may be cases where backup data is reset for the parameters,

etc., set on this unit.

If the update or upgrade fails, press and hold the

on the main unit for

more than 5 seconds, or remove and re-insert the power cord. After

about 1 minute, “Please wait” appears on the display and update

restarts. If the error continues, check the network environment.

209

Содержание NR1608




























































































































































































































































































Результаты поиска

Содержание NR1608

Отзывы:

Похожие инструкции для NR1608

Бренды по названию

Популярные бренды

Marantz NR1608, Руководство пользователя

Результаты поиска

Содержание NR1608

Отзывы:

Похожие инструкции для NR1608

Бренды по названию

Популярные бренды