Marantz NR1200, Руководство по обслуживанию

Страница: 115 / 144

Paths to be confirmed Display Settings What to confirm
5 Analog AD
(MAIN ZONE)
fig.A05a
fig.A05b
A06:AD
Input Source : CBL/SAT
Input Mode : Analog (fixed)
Sound mode : STEREO
Vol 60(-20dB)
MAIN ZONE : On
ZONE2 : Off
• Analog input ⇒ Speaker output (Front L/R, Center, Surround L/R)
• Analog input ⇒ SW(20Hz)
(
b
The input source can be switched to any source except CBL/SAT.)
(
b
Volume 60 is the value when Absolute settings are used. The value is -20 when Relative set-
tings are used)
6 Analog ZONE2 fig.A06
A07:ANALOG-Z2
Input Source : CBL/SAT
Input Mode : Auto
Sound mode : STEREO
Z2 Source : CBL/SAT(select a setting other than Source)
Vol 60(-20dB)
MAIN ZONE : On
ZONE2 : On
• Analog input ⇒ Pre OUT output (ZONE2 L/R)
(
b
Source for ZONE2 does not change even when Source for the main zone is changed.)
(
b
The input source for ZONE2 can be switched to any source except CBL or SAT.)
(
b
Volume 60 is the value when Absolute settings are used. The value is -20 when Relative set-
tings are used)
7 Speaker B
fig.A07
A12:SPEAKER-B
Input Source : CBL/SAT
Input Mode : Analog (fixed)
Sound mode : DIRECT
Speaker Select : B
MAIN ZONE : On
ZONE2 : Off
• Analog input ⇒ Speaker output (Left/Right B)
(
b
The input source can be switched to any source except CBL/SAT.)
8 ZONE2 Downmix
fig.A08a
fig.A08b
A22:Z2 Downmix
Input Source : CBL/SAT
Input Mode : Auto
ZONE2 Source : Source
ZONE2 Vol : 60
MAIN ZONE : On
ZONE2 : On
• Analog input ⇒ Pre OUT output (ZONE2 L/R)
(
b
The input source can be switched to any source except CBL/SAT.)
(Leave the ZONE2 Source as Source.)
(
b
Volume 60 is the value when Absolute settings are used. The value is -20 when Relative set-
tings are used)
1.6. Confirmation items for the video system
See the block diagram fig.VXXth.
Paths to be confirmed Display Settings What to confirm
1 HDMI pass fig.V01
V03:HDMI PASS
Input Source : CBL/SAT
MAIN ZONE : On
ZONE2 : Off
• HDMI input ⇒ HDMI output (MAIN)
(
b
The input source can be switched to any source except CBL/SAT.)
2 HDMI CEC fig.V02
V04:HDMI CEC
Input Source : CBL/SAT
HDMI Control : On
MAIN ZONE : On
ZONE2 : Off
• Check that the stereo receiver enters standby when the TV is set to Standby via HDMI OUT.
(
b
The input source can be switched to any source except CBL/SAT.)
• The ARC path can also be checked (check this using the TV input source).
3
HDMI Audio
(Audio : Stereo
Receiver)
fig.A04a
fig.A04b
V05:H.AUDIO-Amp
Input Source : CBL/SAT
HDMI Control : Off
HDMI Audio : Stereo Receiver (if checking the audio
output from Stereo Receiver)
• HDMI input (PCM) ⇒ Speaker output
(
b
The input source can be switched to any source except CBL/SAT.)
4 HDMI Audio
(Audio : TV)
fig.V03
V06:H.AUDIO-TV
HDMI Audio : TV (if checking the audio output from TV) • HDMI input (PCM) ⇒ HDMI output (audio output from connected TV)
(
b
The input source can be switched to any source except CBL/SAT.)
5 GUI fig.V04
V07:GUI MENU ON
Input Source : CBL/SAT
Setup Menu : On
MAIN ZONE : On
ZONE2 : Off
• GUI display ⇒ HDMI output.
(
b
The input source can be switched to any source except CBL/SAT.)
Before Servicing
This Unit
Electrical
Mechanical
Repair Information
Updating
115