FE Balance
1. Recordable Disc
No. Key
Display/Function
1
Connect the oscilloscope to TE1 and VC in X33 PCB
2
MULTI JOG
Select [EFBAL ADJUST]
3
Load the recordable disc
4 PL AY
[EFBAL
MO-W]
5 PL AY
[EF=$**MOW]
6
MULTI JOG
Write adjustment. Adjust the waveform as follows.
7
PLAY
Display shows [EF=$**MOR] after [EFB=**xSAVE] to save the data in
E2PROM.
Mode changes write to read
Focus and disc servo are on. Tracking servo off.
8
MULTI JOG
Read power adjustment. Adjust the waveform as follows.
9 PL AY
PLAY
Save the data in E2PROM.
Display shows [EFBAL MO-P]
Display shows [EF=$**MOP]
(Pickup travels to search pits and tune the servo to on.)
10
MULTI JOG
Adjust the waveform as follows.
11
PLAY
Display shows [EFBAL CHANGE] after [EFB=**xSAVE] to save the data
in E2PROM.
Display shows [EFBAL CHANGE] disc motor stops.
12 EJECT
Unload
disc.
2. PER Master Test Disc (TGYS-1)
No. Key
Display/Function
1
Load the disc (TGYS-1).
2
PLAY
[EF=$**CD] servo is on
3
MULTI JOG
Adjust the waveform as follows.
4
Save the data in E2PROM.
Display shows [EFB=**xSAVE] in brief time.
[EFBAL ADJUST]
5 EJ ECT Unload
disc.
During this adjustment, the oscilloscope changes in units of about 2%. Adjust so that the waveform comes nearest to
the specified value. (MO groove read power traverse adjustment)
Notes:
1. Data is erased during MO write when a recorded disc is used for this adjustment
2. If the traverse waveform is difficult to be monitored, connect an oscilloscope as shown in the figure below.
7
Содержание MD110
