ENGLISH
34
DTV Channel Setup
Press
/
buttons to select “Bandwidth”, and set the proper value for the
selected Channel.
Press Up and Down buttons to move to “Scan”.
Press
buttons to store all the entered channel data. Then you can get the
following menu showing the scanning process.
After scanning process, the first channel of scanned channel will be displayed.
Press EXIT button to TV viewing or press MENU button to return to the previous
menu.
✓
If the scan fails, please check whether your entered values are correct or not
and the signal reception sensitivity is good or bad.
10
11
12
13
Press MENU button.
Menu items appear on the screen.
Press
/
Buttons to move to “DTV CHANNEL” icon.
Press
button to select “DTV CHANNEL” Icon.
“AUTO SCAN” is highlighted.
Press
/
Buttons to move to “CHANNEL STATE” icon.
Press
buttons to select CHANNEL STATE”
Tuner State menu appears.
Press
/
buttons to select the channel you want.
Press EXIT button to TV viewing or press MENU button to retune to the previous
menu.
♦
Level : Indicating selected network signal strength level.
♦
Quality : Indicating signal to noise ratio.
✓
When the channel is selected, you can check the reception status of the signal.
If the reception signal status is bad, adjust anttena to get the following result.
♦
Tuner : Lock
♦
FEC : 1/2, 2/3, 3/4, 5/6 or 7/8
♦
Level : over 30%
♦
Quality : over 40%
How to Check Tuner State
Users can check parameters of certain channels and scan them.
1
2
3
4
5
6
7
M O V E
S E L E C T
E X I T
A U T O S C A N
M A N U A L S C A N
C H A N N E L S T A T E
G U I D E
C H A N N E L L I S T
F A C T O R Y S E T
D T V C H A N N E L