background image

-  25 -

CDR

GROUND

ANALOG

IN

OUT

L

R

INPUT

SELECT

L

R

BALANCED

IN

R - TRIM - L

0

+22

0

+22

(REF=+16dBu/0dBFS)

HOT(+)

COLD(-)

RS232C

CD

ANALOG DIG

OUT

OUT

R

L

IN

IN

OUT

LOOP
 OUT

DIGITAL
(SPDIF)

SERIAL NO.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECRIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.

INT.(IR)

EXT.

IN

OUT

REMOTE

(RC5)

MODEL NO. CDR510/U1B

AC120V 60HZ 0.5A

M A R A N T Z   A M E R I C A   I N C .

1 1 0 0   M A P L E W O O D   D R I V E

I T A S C A ,   I L   6 0 1 4 3

COMPLIES WITH FDA RADIATION PERMORMANCE
STANDARDS, 21CFR SUBCHAPTER J

MANUFACTURED

WARNING: SHOCK HAZARD - DO NOT OPEN

AVIS : RISQUE DE CHOC ÉLECTRIQUIE - NE PAS OUVRIR.

MML

AC IN

RISK OF ELECTRIC SHOCK

DO NOT OPEN

MADE IN JAPAN

UL

C

US LISTED

AUDIO SYSTEM

69FM

CAUTION

FACTORY CODE

NO 4300

a                    12

12. AC IN

Plug one end of the supplied
power cord in here and the other
into an AC outlet.

AC IN

Remote control (IR)

The supplied infrared remote control permits
most functions of the CDR510 to be controlled
remotely.

The REMOTE EXT / INT (IR) switch (

a

) on the

back of the CDR510 must be at INT (left position)
for the infrared remote to work.

See

Remote batteries

 on page 9 for installing or

changing the remote batteries.

Most of the controls on the remote work identi-
cally to the control on the unit.  The page number
describing identical functioning unit controls is
given below.

Further instruction is supplied for controls that are
on the remote only or that function differently
from controls on the unit.

TRAY

DOOR

REPEAT

PROG.

RANDOM

OPEN/CLOSE

ABC

DEF

GHI

JKL

MN

OPQ

RST

UVW

XYZ

2

1

3

4

7

5

8

6

9

0

SPACE

DISPLAY

SCROLL

CDR

CD

MENU

CANCEL

TR. INCR.

REC

REC TYPE SOURCE

SCAN

DIMMER

ENTER

REMOTE CONTROLLER

RC2100DR

1      2

3
4
5
6

1. TRAY OPEN/CLOSE
button

Push and release to open
or close the currently
selected disc drive tray.

TRAY

OPEN/CLOSE

2. Standby
power button

Not used.

DOOR

OPEN/CLOSE

3. DOOR OPEN/CLOSE
button

Not used.

4. REPEAT button

In playback in either drive push and
release to enter Repeat playback.

REPEAT

After the first press the currently playing track is
repeated. The display says REPEAT TRACK.

Example
display

After the second press the currently playing disc
is repeated. The display says REPEAT ALL.

Example
display

The third press cancels Repeat playback.

CD - R

CD

DIG

REPEAT

TRACK

17

16

15

14

13

12

11

10

9

8

6

5

4

3

2

7

L
R

CD - R

CD

DIG

REPEAT

ALL

17

16

15

14

13

12

11

10

9

8

6

5

4

3

7

L
R

REPEAT ALL

REPEAT TRACK

5. PROG. button

Works the same as the PROG
button, see page 13.

6. RANDOM button

In playback, in 

CHANGER

 mode

only, push and release to enter
RANDOM playback.

PROG.

RANDOM

Tracks are played at random, from either drive,
for playback. Playback will randomly switch
drives, putting the other drive in Play pause.

Example
display

After a track is played it is removed from being
randomly chosen again until all tracks on both
drives have been played. Playback then auto-
matically stops.

If RANDOM and REPEAT ALL are combined
tracks are played randomly until all tracks have
been played. Then tracks are re-randomized and
play continues.

CD - R

CD

DIG

17

16

15

13

12

11

10

8

6

5

3

7

L
R

RANDOM

CHANGER

2

1

RANDOM

Track 12 is playing. Tracks 4, 9 and 14 have

been randomly played on the CD drive

.

Содержание CDR510


























































Отзывы: