o
IMAX
Sets the audio mode for IMAX playback.
Auto
(Default):
Automatically enables the IMAX mode
when IMAX content is detected.
On:
Enables IMAX settings for IMAX
streaming content when automatic
detection is not possible.
Off:
Disables the IMAX mode.
0
In case of streaming the IMAX contents from online streaming service using
TV Apps or player Apps (such as Blu-ray player’s App), this unit may not
detect the signal as IMAX contents automatically. In this case, you can enable
IMAX mode by setting this parameter to “On” manually.
0
This setting can only be turned “On” when DTS 5.1 channel content recorded
as IMAX DTS is input.
0
This setting cannot be set when headphones are used.
o
IMAX Audio Settings
You can configure special IMAX audio settings to recreate the
conditions of an IMAX theater.
Auto
(Default):
Applies the optimized speaker settings to
reproduce similar to the IMAX theater
environment.
Manual:
Manually adjusts the “High Pass Filter”,
“Low Pass Filter” and “Subwoofer Mode”.
0
You can set this when sound mode is “IMAX DTS” or “IMAX DTS:X”.
0
“Speakers” - “Crossovers”, “Bass” - “Subwoofer Mode” and “LPF for LFE” in
the menu cannot be applied during IMAX playback.
o
High Pass Filter
Set the high pass filter cutoff frequency for all speakers during IMAX
playback.
40 Hz
/
60 Hz
/
80 Hz
/
90 Hz
/
100 Hz
/
110 Hz
/
120 Hz
/
150 Hz
/
180 Hz
/
200 Hz
/
250 Hz (Default: 80 Hz)
0
You can set this when “IMAX Audio Settings” is set to “Manual”.
173
