o
Pre-out for Bi-Amp/ Pre-out for Front B
When “Assign Mode” is set to “9.1ch (Bi-Amp)” or “9.1ch + Front B” in
the menu, select the PRE OUT connectors used for bi-amp or second
pair front speakers.
FRONT WIDE/HEIGHT2
(Default)
：
The assigned channels are output from
the FRONT WIDE/HEIGHT2 PRE OUT
connectors. The front wide channel
cannot be used. Up to one pair of height,
ceiling, and Dolby Atmos Enabled
channels can be used.
HEIGHT1
：
The assigned channels are output from
the HEIGHT1 speaker terminals. The
height, ceiling, and Dolby Atmos Enabled
channels cannot be used.
SURROUND BACK
：
The assigned channels are output from
the SURROUND BACK PRE OUT
connectors. The surround back channel
cannot be used. Up to two pairs of height,
ceiling, and Dolby Atmos Enabled
channels can be used.
o
Floor
n
Layout
Select the floor speakers location.
5ch & SB & FW
：
This layout combines a surround back or
front wide speaker with the basic 5-
channel layout.
5ch & SB
(Default)
：
This layout combines a surround back
speaker with the basic 5-channel layout.
5ch & FW
：
This layout combines a front wide
speaker with the basic 5-channel layout.
5ch
：
This is a basic 5-channel layout that uses
front speakers, center speakers and
surround speakers.
241
