Marani DPA360P, Руководство пользователя

Страница: 8 / 35

6
2.1 Output
[x] [Name] LPF
-> YF = 20.0 Hz
2.1a. If selected a filter from Buttw_1st up to Bessel_4th, then
the filter's Cutting Frequency can be set as follow:
Output
[x] [Name] LPF
[Thousands Editor] [Hundreds Editor] [Units Editor]
-> Edit Freq = 250Hz
[Freq.]
1000Hz
[Freq.]
100Hz
[Freq.]
1Hz
: : :
20000Hz 900Hz 100Hz
2.1b. If selected a Custom Filter (from 2 nd up to 4 th order), depending
from the filter's order, the cascade od second order Cells building
the filter are available for editing in their Freq and Q parameter,
indepndently.
For proceeding with the editing of a custom filter Cell, the PM1 is
here used foir the Cell selection.
So, a Cutom Filter can be set in its parameters, as follow:
2.1b.1. If selected a Custom_2nd filter
Output
[x] [Name] LPF
- >Custom_2nd F = 250Hz [2 nd order Cells selection]
→
Filtx F= 250Hz Q = 0.3
[2
nd
Ord Cell
x
]
x=1
[Freq.]
20Hz
[Q]
0.05
: : :
x=1 20kHz 10.00
2.1b.2. If selected a Custom_3rd filter
Output
[x] [Name] LPF
-
>Custom_3rd F = 250Hz
→
Filtx F= 250Hz Q = 0.3
[2 nd Ord Cell x ]
x=1
[Freq.]
20Hz
[Q]
0.05
: : :
[Q not available] x=2 20kHz 10.00
2.1b.3. If selected a Custom_4th filter
Output
[x] [Name] LPF
-
>Custom_4th F = 250Hz
→
Filtx F= 250Hz Q = 0.3
[2 nd Ord Cell x ]
x=1
[Freq.]
20Hz
[Q]
0.05
: : :
x=2 20kHz 10.00
Once editing the Cells “Filtx”, pressing the Enter Button can be accessed also for the Custom Filters the page for the fast frequency setting, as available
for the NOT Custom Filters and which way of working is described at the point 1.1a.
3. Out-[x] EQ-[x] (X from 1 to 7)
Byp = Off Type = Y (Y = Peaking_Eq, Hi-Shelv_Q, Lo-Shelv_Q, )
->
Byp = Off Type = Y
PM1 N/A
Off Peaking_Eq
: :
On Notch Filt
Through the PM2, it is possible to Byp the single selected filter.
Through the PM3, it is possible to select one of the 17 available
filters' type.
Once selected the filter Type and NOT in Byp mode, pressing
again the ENTER button can be accessed the selected filter's editing page.
3.1 Out-[x]
EQ-[x] (X from 1 to 7)
->
Byp = Off Type = Y
3.1a. If selected a Peaking_Eq filter, then the filter can be set by
the following parameters
Out-[x]
EQ-[x] (up to 7 filters available)
[Freq] [Gain] [Q]
-> 1000Hz +0.0dB Q=1.00 [Freq.] 20Hz [Amp.] -15.0 dB [Q] 0.30
: : :
20kHz +15.0 dB 20.00
3.1d. If selected a Hi-Shelv_Q (variable Q High Shelving) filter,
then the filter can be set by the following parameters
Out-[x]
EQ-[x] (up to 7 filters available)
[Freq] [Gain] [Q]
-> 1000Hz +0.0dB Q=1.00
[Freq.]
80Hz
[Amp.]
-12.0 dB
[Q]
0.30
: : :
20kHz +12.0 dB 20.00
3.1g. If selected a Lo-Shelv_Q (variable Q Low Shelving) filter,
then the filter can be set by the following parameters
Out-[x]
EQ-[x] (up to 7 filters available)
[Freq] [Gain] [Q]
-> 1000Hz +0.0dB Q=1.00
[Freq.]
80Hz
[Amp.]
-12.0 dB
[Q]
0.30
: : :
20kHz +12.0 dB 20.00
ENTER
ESC
ENTER
ESC
ENTER
ESC