25
Source page
– from this page it is possible to assign anyone of the Inputs to any Output Channel with the desired
percentage of level, as in 4 channel mixer:
1.
Input A with x% or Muted
2.
Input B with y% or Muted
3.
Input C with k% or Muted
4.
Input D with z% or Muted
In order to select the Inputs to assign to the the output and its percentage, need to access the Source Page Sub
Menu pressing ENTER, then selecting with the PM1 encoder the Input to assign or Mute and with the PM2 and
PM3 encoders, if to MUTE that input (PM2) or to assign with the desired percentage from -30dBu (min level) up to
00dBu (max) with the PM3.
Assigning ONLY the Input A, in example, with full amplitude to the output 1, the LCD will appear as follow for the In-
A Sub Menu:
And as follow for the Sub Menu related to the other Inputs and accessed through the PM1 encoder:
Once back to the Main Source Page after the above selection, the screen will appear as follow:
Gain page
– from this screen it is possible to set the Output Channels Level from -18dB to +18dB, press ENTER
an arrow will appear on the left of the screen “
->
” then use the “PM2” or “PM3” buttons.
The value set on this screen will only affect the input level of the selected Channel 1/2/3/4/5/6.
The following is an example screen for the “Gain” page where the Gain of the Output Channel 1 is set to +0.0dB
RMS Cmp sub-menu [1/2]
– from this page it is possible to set the Threshold and Ratio parameters of the Output
Channels RMS Compressor.
The following is an example screen for the RMS Compressor [1/2] page where the Threshold of the RMS
Compressor is set at +5dBu and the Ratio at 2:1
Out-1 Name Gain
-> Gain = + 0.0dB
Out-1 Name RMS Cmp
Thr: +5dBu Rto: 2:1
Out-1 Name RMS Cmp
->Thr: +5dBu Rto: 2:1
Out-1 Out-1 Source
-->In-A Mute=Off Val=00
Out-1 Out-1 Source
-->In-B Mute=On Val=00
Out-1 Out-1 Source
-->In-C Mute=On Val=00
Out-1 Out-1 Source
-->In-D Mute=On Val=00
Out-1 Out-1 Source
A: 00 B:--- C:---
