Marani DPA-880T, Руководство пользователя

Страница: 6 / 25

PC Sw Remote Control Operations
The DPA880 can be controlled by a Remote Control Sw running on Pc, allowing to fully edit the all
processes available on each channel of the DPA880.
More, once created the desired configurations and selected the desired processes, the complete
channels' set up can be stored within the DPA880 and recalled later on as preset also when the
unit is working in Stand Alone Mode or as Wall Control Panel operating unit.
Once launched the Pc Sw Remote Control, previously installed on Pc (for the installation it is
enough to run the “Installation Sw” and to install also the USB driver which installation instruction
are on the CD containing the Remote Control Sw and coming with the DPA880), the following
screen shot will appear on the Pc:
The screen above is allowing to select what kind of connection has to be used and to set the
parameters for the selected connection.
USB : the USB connection has to be selected when the DPA880 is connected to the PC through the
USB line.
In this case the DPA880 will be controlled as ONE ONLY unit, not being allowed the net control of
more units when using the USB connection.
Nevertheless, when using the USB connection, the Pc Remote Control Sw can operate at the same
time of the Wall Panel Remote Control, there where the Wall Panel Remote Control is connected to
the RS485 connection.
In the USB mode (chosen by “checking” the USB button on the “Communication Port” frame),
need to assign the proper “COM” port in order to match the COM port assigned by the Pc to the
“USB to Serial Port” within the Device Manager window at the “Ports (COM&LPT)” directory.
RS485 : the RS485 connection has to be selected when the DPA880 is connected to the PC
through the RS485 line.
In this case the DPA880 will be controlled as one of a NET of chained units, being allowed the net
control of more units when using the RS485 connection.
When using the Rs485 connection, the Pc Remote Control Sw cannot operate at the same time of
the Wall Panel Remote Control.
In the RS485 mode (chosen by “checking” the RS485 button on the “Communication Port” frame),
need to assign the proper “COM” port in order to match the COM port assigned by the Pc to the
“USB to Serial Port” within the Device Manager window at the “Ports (COM&LPT)” directory.