Marani CLP-160, Руководство пользователя

Страница: 10 / 19

RMS Compressor
The CLP160 is performing a powerful RMS Stereo Compressor.
In order to make it working properly, need to be in a condition similar to the one
described before for the 0dBu path.
The following data are referred to a measurement condition based on the 0dBu
setting, which means:
1. Testing Input Signal: Sinusoid set to 0dBu
2. Input Level Potentiometer set to 7 with reference to the Fig A
3. Output Level Potentiometer set to 7 with reference to the Fig B
Any different condition on the Input Signal, can bring to the same output results
if the Input Level Potentiometer will be Adjusted in order to be close to the
Input Clipping condition, which means that if the Input Signal will be
lower/higher than 0dBu, the potentiometer will have to adjust the input to the
A/D converter so to go back to a “0dBu” condition as the one used as reference.
RMS Compressor available Parameters: for the RMS Compressor, the classic
parameters can be set in order to implement the compression process shown in
the following diagram:
9