
Certificate Number: 255416-2516776 Project Number: 2516776 Page Number:74
INSTALLATION AND OPERATION MANUAL
MARANA FORNI srl unipersonale
via Turbina 98 37139 Chievo-Verona-Italia
tel. +39 045 6704503 - fax +39 045 7156118
www.maranaforni.it - info@maranaforni.it
Skype: maranaforni
VER
2.1
© Riproduzione vietata
PAG
22 / 27
E.
ACTIVATING/DEACTIVATING automatic/manual mode
This feature will only be possible if the oven unit is connected to the gas unit.
Instructions
With the burners lit, the automatic or manual modes can be set by pressing the
buttons (11) and
TURBO
(9).
Important: The Green LEDs 12 and 5 stay on in
manual mode
and flash in
automatic
mode
NOTE:
Both burners
can work separately in automatic or manual mode.
F.
SETTING THE BAKING BURNER WHILE COOKING PIZZAS (only in automatic mode)
This feature will only be possible if the oven unit is connected to the gas unit.
With the gas unit set to
automatic mode
,
you can bake pizzas with the flame setting of
your choice.
Instructions
Start baking by holding down the operating lever from the oven unit (on SU & GIU
ovens this lever moves from left to right). Use the buttons on the gas unit to manually
choose the flame strength during baking. Once the cooking time has finished, the
flame will return to the strength that is required to maintain the oven temperature. If
cooking begins again using the unit lever, the flame will return to the strength of the
previous baking procedure to ensure the flame always maintains the same strength in
each cook and to avoid a variation in flame strength between one bake and another.
If you have an SU & GIU oven, i.e. an oven with a device to raise the hotplate, this
function can be carried out for each baking level, and the oven will memorise the
flame strength in each height.
G.
BURNER "SAFETY LOCK " MODE
If a red light appears on LEDs 9 and 6 one of the burners is not working properly.
Once this mode is on, the burners cannot be lit without identifying and solving the
cause of this problem.
See point H.
H.
RELIGHTING THE BURNER IN "SAFETY LOCK" MODE
If the burners are locked and cannot be lit (see point G), the system can be re-started
to release the lock and to start up the burners again.
Instructions
All burners can be relit at the same time by pressing the button, or separately by
pressing the
(for the baking burner) or the
TURBO
button (for the burner located
under the hotplate). Once this is done, the LEDs will start to flash and, after a few
seconds, will switch off. The burners can now be relit.
See points B and C
.