Step
Key
Description
1
PRG
“cir” is displayed (if no set points were previous-
ly programmed).
2
3
Key in circuit number.
3
E
Enters circuit number.
4
0, 8,
Key in ON time.
0, 0
5
2, 3, 4, Key in weekdays (display continues to roll
5, 6
through each number selected).
6
TYP
Press key three times; a flashing dash appears
on the lower right of display indicating a pulse
event.
7
E
Enters set point. “cir” is displayed.
8
4
Key in circuit number.
9
E
Enters circuit number.
10
0, 5, Key in OFF time.
0, 0
11
PM
Dash appears on the upper right of display indi-
cating P.M.
12 2, 3, 4, Key in weekdays.
5, 6
13
TYP
Press key three times; a flashing dash appears
on the lower right of display, indicating a pulse
event.
14
E
Enters set point. “cir” is displayed.
15
4
Key in circuit number for “sweep.”
16
E
Enters circuit number.
17
1, 0,
Key in “sweep” OFF time.
0, 0
18
PM
Dash appears on the upper right of display indi-
cating P.M.
19 2, 3, 4, Key in weekdays.
5, 6
20
TYP
Press key three times; a flashing dash appears
on the lower right of display, indicating a pulse
event.
21
E
Enters set point.
22
RUN
Exits programming mode.
23
DUR
Duration is displayed for circuit 1.
24
E
Press key twice to advance to circuit 3. “01 3”
is displayed.
15
