Mantracourt Electronics Limited
T24-RA User Manual
4
T24 Toolkit
The T24 Toolkit provides a means of simple configuration and calibration of the acquisition module along with
useful tools to aid integration.
Run the T24 Toolkit software application.
PLEASE NOTE: Depending on which acquisition module is selected the screenshots may vary slightly. This will generally be in naming of
units and device descriptions. The screenshots shown are those shown when a T24-PA strain gauge acquisition module is connected.
General Pages
Setup Base Station Communications
Select
USB
as the interface and select 1 as the Base Station Address.
In the toolkit all items that can be changed by the user are coloured orange.
To change a value just click on the relevant orange item. You will then be presented with a new dialog window
allowing you to change the value.
This may use a slider, text box or list to allow your new value to be entered.
Click the Home button to attempt communications with the base station.
If no communications can be established the toolkit will remain on this page. You will need to check that the
base station is powered and that it is connected to the converter correctly.
