E-2
For a complete tight f t every bolt
should have a f at washer.
All panels are labeled Left and Right as
viewed from the front of unit.
PLEASE READ AND FOLLOW ALL SAFETY TIPS
GETTING STARTED
1. Before assembly, CAREFULLY use scissors or utility knife to cut and unwrap all parts. Make
sure you do not discard the hardware.
2. Make sure that you have all the parts listed. If you are missing any parts please email Customer
Service: www.twinstarhome.com or call 1-866-661-1218 in English, 1-866-374-9203 in French
or 1-866-661-1218 in Spanish. Please identify the parts you need and model number. Make sure
to include your name and address.
CAUTION:
DO NOT MOVE MANTEL OR INSERT WHILE PLUGGED INTO POWER SUPPLY.
HELPFUL HINTS
•
Some steps are more easily handled with two adults.
•
Attach the f replace insert to the completed mantel last. INSTALL INSERT IN FROM THE
BACK OF THE FIREPLACE SO AS NOT TO SCRATCH THE HEARTH/BASE.
• Use care in assembling your new f replace, take your time and use the hardware provided and a
quality Phillips head screwdriver.
•
Do not sit on any part of the mantel.
CARE & CLEANING
1. Dust your f replace regularly with a soft non-lint producing cloth or household dusting product.
2. You can clean your f replace with a gentle non-abrasive household cleaner. Make sure to dry your
f replace immediately with a soft cloth or towel.
Left
Side
Panel
Right
Side
Panel
Hearth/Base
A
B
C
J
J
L1
L2 M
K
K
L Bracket
1. Locate Hearth/Base (A) and set out f nished
side up on the f oor.
2. Attach the
L Bracket
(K) to the Left Side Panel
(B), then screw Bolt (L2) into Flat Washer
(M) with Allen Key (J) through the
pre-drilled holes.
Attach the Left Side Panel to Hearth/Base.
Line-up the holes in the L Bracket (K) with
the holes in the Hearth/Base, screw Bolt (L1)
into Flat Washer (M) with Allen Key (J) to
tighten. Make sure the Bolts (L1, L2) are
placed in the pre-drilled holes.
Repeat for the opposite side.
To insure a proper fit,
make sure to assemble
the bracket to each of the
side panel holes first, and
afterwards align the holes
to the base.
USE THE LONGER
BOLTS TO FASTEN
INTO THE BASE.
