Manta MMP12, Руководство пользователя, Страница: 28 / 56

MMP12 Portable Air Conditioner
2
sensing the difference between the actual ambient
room temperature and the set temperature on the
remote controller.
˜
If the AUTO mode is not comfortable for you , the de-
sired mode can be selected manually.
COOL, HEAT, and FAN ONLY Operation
1. If the AUTO mode is not comfortable , you may ma-
nually override the settings by using COOL, DRY,
HEAT( HEAT PUMP units only), or FAN ONLY mo-
des.
2. Push the TEMP button to set the desired room tem-
perature. When in COOLING mode, the most com-
fortable settings are 21
o C/70 o F or above. When in
HEATING mode, the most comfortable settings are
28
o C/82 o F or below.
3. Push the FAN SPEED to select the FAN mode of
AUTO, HIGH, MED or LOW.
4. Push the ON/OFF button. The operation lamp lights
and the air conditioner starts to operate per your
settings. Push the ON/OFF button again to stop this
unit operation.
Dry operation
1. Push the MODE button to select DRY.
2. Push the TEMP button to set the desired temperatu-
re from 21 o C/70 o F to 28 o C/82 o F.
3. Push the ON/OFF button. The operation lamp lights
and the air conditioner starts to operate in the DRY
mode. Push the ON/OFF button again to stop this
unit operation.
TIMER Operation
TIMER ON button can set the auto-on time of the unit.
TIMER OFF button can set the auto-off time of the unit.
To set the starting time
1. Push the TIMER ON button, then the remote control-
ler shows TIMER ON , the last set time for the star-
ting operation and the signal „h” will be shown on the
DIGITAL DISPLAY area. You are now ready to reset
the time to START the operation.
2. Push the TIMER ON button again to set desired unit
start time.
3. After setting the TIMER ON ,there will be a one-half
second delay before the remote controller transmits
the signal to the air conditioner. Then, after approxi-
mately another 2 seconds, the signal „h” disappears
and the set temperature will re-appear on the digital
display.
To set the stopping time
1. After setting the TIMER OFF ,there will be a one-half
second delay before the remote controller transmits
the signal to the air conditioner. Then, after approxi-
mately another 2 seconds, the signal „h” disappears
and the set temperature will re-appear on the digital
display.
2. Push the TIMER OFF button again to set the time
you want to stop the operation.
3. Push the TIMER OFF button and the remote con-
troller will show TIMER OFF, the last set time for the
stopping operation and the signal „h” will be shown
on the DIGITAL DISPLAY area. You are now ready
to reset the time of the STOP operation.
Set the starting & stopping time
1. Push the TIMER ON button, the remote controller will
show TIMER ON, the last set time for START ope-
ration and the signal „h” will be shown on the DIGI-
TAL display area. You are now ready to readjust the
TIMER ON to start the operation.
2. Push the TIMER ON button again to set the time you
want to start the operation.
3. Push the TIMER OFF button, the remote controller
will show TIMER OFF, the last set time for STOP
operation and the signal „h” will be shown on the DI-
GITAL display area. You are now ready to reset the
time to STOP operation.
4. Push the TIMER OFF button again to set the time
you want to stop the operation.
5. After setting the TIMER, there will be a one-half se-
cond delay before the remote controller transmits the
signal to the Air Conditioner. Then, after approxima-
tely another 2 seconds, the set temperature will re-
appear on the digital display.
Note:
˜
Please reset the TIMER after cancelling the former
time settings.
˜
The setting time is relative time. That is the time set
is based on the delay of the current time.
Warning!
˜
Be sure there are no barriers between the remote
controller and the receiver of indoor unit otherwise
the air conditioner will not work.
˜
Keep the Remote Controller away from all liquids.
˜
Protect the Remote Controller from high temperatu-
res and exposure to radiation.
˜
Keep the indoor receiver out of direct sunlight or the
Air Conditioner may malfunction.
˜
Keep controller away from EMI (Electro-Magnetic In-
terference) supplied by other household appliances.