UsER’s MaNUal
Troubleshooting
PROBLEM
POTENTIAL REASONS
WHAT TO DO
No picture
Power isn’t connected
Connect the power
The power switch is not on
Switch on the power
Screen Shows
„No Signal„
Not connect DVB-T cable
Plug in the DVB-T cable
Incorrect setting
Set up correct parameter
No sound from speaker
No or incorrect connection with audio cable
Connect the audio cable correctly
Mute the sound
Switch on the correct, volume control
Incorrect sound track
Try another sound track
Only sound, no Image
on the screen
No or incorrect connection with AV cable
Connect the video cable correctly
Program is a radio program
Press TV/RADIO key to shift into TV mode
Remote control is not
workable
The battery is exhausted
Change new battery
Remote control unit is not in the right opposite of
the front panel or too far from it
Adjust the way of holding remote control
unit and get near to the panel
The image stop
Suddenly or mosaic
The signal i to weak
Strengthen the signal
Specification
ITEM
SUB ITEM
PARAMETER
Tuner
Input Frequency
170-230MHz, 470-860MHz
FR Input Level
-20 ~-78dBm
FR Bandwidth
7,8MHz
Modulation
QPSK, 16QAM, 64QAM
Video
Decoder Format
MPEG-2(ISO/IEC 13818-2)
MPEG-4(ISO/IEC 14496)
H.264 (ISO/IEC 14496-10)
1080i@30fps
Output Format
480i/480p/576i/576p/720p/1280i/1280p
Output Port
SCART, HDMI
Audio
Decoder Format
MPEG-1&MPEG-2(layer1&layer2)
AAC,AAC+/HE-AAC,AC3, E-AC-3 (Dolby D)
Audio output
Digital audio: S/PDIF
Power
Voltage
~100~240V,50 / 60HZ
POWER
Max 10 W
