USER’S MANUAL
38
Auto Search
Auto search is a kind of intelligent and convenient mode of
programs searching, which covers programs of all frequent points
of target countries or regions.
At present, this system covers many targets countries and
regions including: Germany/ UK/ Italy/ France/ Spain/ Holland/
Taiwan/ China/Norway/ Finland ect.
You can move the cursor to “auto search” via press “UP/DOWN”
key under “installation menu”, then press “OK” to OK into Auto
searching page, As shown in the figure below:
After OKing into auto search page, system will scan all pro-
grams one by one under frequency points of current countries
or regions selected automatically.
During scanning, press “EXIT” key to stop and exit scanning.
If any program is detected and the scanning process is finished,
system will exit the scanning page and save the program, at the
same time return to the “installation menu” and to play them.
Manual Search
If you understand much about digital TV and know the fre-
quency of the program or if you want to scan the program at
any frequency required, you can select manual search, witch
can save your much time.
You can move the cursor to “manual search” via press “UP/
DOWN” key under “installation menu”, then press “OK” to OK
into manual search page, As shown in the figure below:
2. Prior manual search, you need to configure relevant para-
meters including:
(1).Frequency(KHz): the default frequency is settled by different
country, you can input relevant digitals to modify it.;
(2).Bandwidth: the default value of bandwidth is settled by
different country while you can set it to 6MHz,7MHz,8MHz.;
3. Press “OK” key after configuration of parameters to start
manual scan.
Channel Filter
All of channels or only unencrypted channels are set to be
searched by selective settings, shown as the following figure:
Country
Many targets countries and regions are set to be searched by
selective settings, shown as the following figure:
