USER’S MANUAL
37
Rec & Time shift
Rec
At playback screen press “PVR” key to start record, system will
has 2 seconds for initialization. As shown in the figure below:
When initialization success, the screen lift top will show “REC”
icon, recording and playing current program. You can press “info”
key to watch current recording information.
Press “stop” key while recording, will stop record and resume
normal playback mode.
In the recording, you also can use REC key to set timer for sub-
scribe stop record, besides you can reset the time optionally.(can
set the time length as cancel(00:00),or user define length)
when the space is insufficient while recording, system will
show prompt message then stop recording and resume normal
play back mode.
In the recording, if a write failure happened is by reason of
storage bad track problems, system will show prompt message
and try again.
In the recording, you also can operation Menu, EPG, TTX,
Subtitle and so on function like normal play back mode.
Time shift
1) In time shift mode, you can playing before recorded pro-
gram when recording program while no need wait for recording
finish.
2) In the below case press “PAUSE” key can into time shift
mode, then the “TIME SHIFT” icon will be shown at screen lift
top area, and record program play will beginning at recording
start time.
a) In normal playback mode, and time shift set as Auto or Pause
within PVR Config menu.
b) In recording mode.
3) In the below case press “<<” key also can into time shift
mode, and playing program will fast rewind.
a) In normal playback mode, and time shift set as Auto or Pause
within PVR Config menu.
b) In recording mode.
4) In time shift mode, when press “STOP” key will exit time
shift mode and turn to playing current program.(recording is
still going on)
5) In time shift mode, when operate fast forward, if playback
time is catch up current program playing time, then system
will automatic exit time shift mode and turn to playing current
program. (recording is still going on)
6) In time shift mode, info banner looks like recording, but
display time is dispersion of current playing content time with
live program time and use cursor prompt the relative position
of current playing content in total recording content.
Time shift After Recoder
1) In this mode, when pressing “STOP” key, the set top box will
exit time shift mode but recording is still going on.
Installation
There are two kinds of Installation mode as follow:
Auto Search
Manual Search
You can OK into parameter “installation page” via input pas-
sword digitals(default password is “0000”), As shown in the
figure below:
