Manta CTA-5000, Руководство пользователя

Страница: 68 / 100

Mob -60
68
1.2.4. Placing and removing a battery
Battery Iinstallation
– Insert the bottom of battery into the jaw opening
on the back of phone, and then press the battery down until it clicks into
place, as shown.
Remove a battery – Switch off the phone first and then push the battery
upwards, so that the battery will be removed from the phone, as shown.
1.3. Charge a battery
1.3.1. Charge a battery by the travel charger
˜
Plug the travel charger into the bottom outlet and enable the side with
arrow of charger upward
˜
The indication bar of battery scrolls when battery charging is in pro-
cess; In this process the mobile phone can be used naturally but it will
increase the charger time.
˜
When the indication bar of battery stops scrolling, it means finish of
charging; Please firstly switch off the power and then pull out the
charger. Please press the grey button on both sides of the charger
head before you pull out the charger in case the charger is damaged.
1.3.2. Low battery Indicator
˜
When the battery is weak and only a few minutes of talk time remain,
you will hear a warning tone and a message of low battery will be re-
peated at regular intervals on the display;
˜
When the battery is too weak for the phone to operate, it switches off
automatically.
1.3.3. Battery usage
˜
The battery will consume more power when the phone is in talk mode.
Therefore, the longer the talk time, the shorter the standby time;
˜
The lifetime of battery may vary with the external environment (i.e.,
number of charging, ambient temperature, method of usage, radio
wave and number of keypad lighting).