Manta 2001, Руководство пользователя

Страница: 16 / 20

LCD MONITOR/TV WITH TXT
® 2001/2002
16
Adjusting the picture settings
Your TV has several settings which allow you to control
picture quality:
Brightness, Contrast, Saturation, Sharpness.
1. Press MENU button to enter picture settings menu.
2. Press
►
button to select Brightness, and press
◄
/
►
to adjust brightness.
3. Press
▲
/
▼
to select Contrast, and press
◄
/
►
to
adjust contrast.
4. Adjusting saturation and sharpness is the same as
adjusting contrast.
5. When you are satisfied with the settings, press the
MENU button repeatedly to return to normal viewing.
Setting the time
You can select a time period of between 10 and 120 mi-
nutes after which the television automatically switches to
standby mode by pressing (znaczek zegara) button.
1. Press the sleep button (znaczek zegara) on the re-
mote control repeatedly, and cycle through the pre-
set time intervals (0, 10… 110, 120).
2. To cancel the sleep timer function, press the sleep
button (znaczek zegara) repeatedly and select pre-
seted time interval ‘0’.
Using the Teletext
Feature
Displaying teletext information
You can display teletext information at any time, but si-
gnal reception must be good. Otherwise:
˜
Information may be missing.
˜
Some pages may not be displayed.
To activate the teletext mode and display the content
page:
1. Using the ▲ / ▼ button to select the channel providing
the teletext service.
2. Press ON/MIX/OFF button to activate the teletext
only mode, or teletext and picture mixed mode, or
return to picture only mode.
*If any broken character appears while teletext is being
viewed, make sure that the teletext language is identical
with the language in the “Function” menu. If both langu-
ages are different, select the same language with the tele-
text language on the “Function” menu.
Selecting a specific teletext page
Press the number buttons on the remote control to enter
the page number directly:
Enter the three-digit page number listed in the Page
Content by pressing the corresponding numeric buttons.
And the current counter is incremented and the page is
then displayed.
Changing the screen position
Preset to the PC mode by button or by input source
menu.
1. Press the MENU button to select picture setting
menu, and press ▲ / ▼ to select “Geometry” menu.
2. Press
►
button and then
▲
/
▼
to select the item you
want to adjust.
3. Press
◄
/
►
to adjust the settings.
Changing the screen color setting
1. Press the MENU button to select picture setting
menu, and press
▲
/
▼
to select “Function” menu.
2. Press
►
button and then
▲
/
▼
to select Color Temp.
3. Press ◄ / ► to select the color settings (Warn, Stan-
dard, Cool).
4. Press the MENU repeatedly to return to normal vie-
wing.
Troubleshooting:
No image, no LED display
Check the power supply of TV, such as AC/DC adapter,
AC power outlet, DC power connection.
No image, LED is orange color
Check input signal sources and its cable, or the TV is at
standby status.
Prompt “Input Not Supported” or “Out of Range”
Check the resolution of the PC VGA output. The opti-
mum vertical refresh frequency of LCD is 60 Hz.
Image position is not right
Do the “Auto Config” or manually adjust the image.
There are “water wave”, “twinkling point”, or in-
correct color on the screen
Check the cable of input signal source and the quality of
those signal sources.
The volume of speaker is too small or noisy
Check the volume value, increase the volume via adju-
sting the OSD menu, check the source quality.