NAME
DATE
DESCRIPTION
REVISION LEVEL
NAME
DATE
DESCRIPTION
EMK
1/15/15
CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES
DWN
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
DT-30A, 60SA, & CDTC-70
DRAWING TABLE SYSTEM - PLAIN
ASSEMBLY INSTRUCTIONS
REV A
4 OF 5
NTS
EMK
1/15/15
NOTE:
1.
STEP 3:
SCREW LEG LEVELERS INTO
T-NUT ON BOTTOM OF LEGS.
STEP 4:
USING A 4MM ALLEN WRENCH, INSERT THE CONFIRMATS INTO ONE LEG AND SCREW
INTO BRACE. REPEAT FOR THE OTHER LEGS. MAKE SURE BRACES ARE STRAIGHT AND
ALL CONFIRMATS ARE TIGHT. ATTACH STRETCHER TO THE BRACES USING THE
CONFIRMATS PROVIDED. GO BACK TO STEP 2 AND TIGHTEN UP THE HANGER BOLTS
FOR EACH LEG USING A
1
2
" WRENCH OR
1
2
" SOCKET AND TORQUE WRENCH, TO A
MINIMUM OF 12FT LBS BUT NOT TO EXCEED 17FT LBS .
STEP 5:
IF YOUR TABLE DOES NOT HAVE A KEYBOARD TRAY OR CPU SUPPORT SKIP TO STEP 8.
ATTACH KEYBOARD TRAY TO THE TWO KEYBOARD MOUNTING BOARDS WITH THE
HARDWARE PROVIDED. NOTE: IT MAY BE EASIER TO ATTACH KEYBOARD TRAY WHILE
TABLE IS ON ITS TOP . ATTACH THE MONITOR POST TO THE TOP USING HARDWARE
PROVIDED (NOT SHOWN).
CLOSE UP OF LEG LEVELER ASSMEBLY
TOPS REMOVED TO SHOW CLARITY
LEG LEVELER
STRETCHER
LEG BRACES
KEYBOARD
MOUNTING
BOARDS
KEYBOARD TRAY
11/30/2015 7:10:03 AM, DWG To PDF.pc3
