ASSEMBLY TEMPLATE
NOTE:
1.
REVISION LEVEL
EMK
10/26/16
CREATED DRAWING
REV.
A
-
DWN
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
STUDENT SERVICE ISLAND
STUDENT SERVICE ISLAND-SINGLE
ASSEMBLY INSTRUCTIONS
REV A
3 OF 6
NTS
EMK
10/26/16
NAME
DATE
DESCRIPTION
ECN NO.
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES
STEP 1:
PLACE CABINET IN DESIRED LOCATION. (IF YOU HAVE A "K"
SERIES CABINET, PLACE CABINET OVER UTILITY HOOK-UPS).
LEVEL CABINET AND ATTACH TO FLOOR.
STEP 2:
WITH HELP FROM ANOTHER PERSON, POSITION THE RIGHT APRON ASSEMBLY UP TO RIGHT SIDE OF
CABINET SO IT IS CENTERED CORRECTLY AND FLUSH WITH TOP OF BASE CABINET. PLACE THE L
BRACKETS IN CORRECT POSITION ON APRON ASSEMBLY AND RIGHT SIDE (SHOULD BE FLUSH WITH TOP
EDGE OF FRONT AND BACK APRONS). MARK ON THE SIDE OF THE CABINET WHERE THE L BRACKET
NEEDS TO BE ATTACHED. SET APRON ASSEMBLY AND L BRACKETS DOWN. REPEAT FOR LEFT SIDE.
STEP 3:
ATTACH L BRACKETS TO RIGHT SIDE OF CABINET
WITH SCREWS PROVIDED. REPEAT FOR LEFT SIDE.
RIGHT SIDE
OF CABINET
RIGHT
APRON
ASSEMBLY
BACK
APRON
FRONT
APRON
BASE CABINET
0.25"
DISTANCE FROM BACK
EDGE OF RIGHT SIDE TO
BACK APRON
(SAME ON FRONT OF TABLE)
POSITION L BRACKETS AND APRON
ASSEMBLY HERE
(FLUSH WITH TOP EDGE OF FRONT AND
BACK APRONS AND TOP OF BASE CABINET)
RIGHT SIDE
L BRACKETS
CLOSE UP OF RIGHT SIDE SHOWN
CLOSE UP OF RIGHT SIDE AND RIGHT APRON ASSEMBLY SHOWN
& C2710KF SERIES.dwg, 12/2/2016 12:00:31 PM, DWG To PDF.pc3
