Warning:
For your safety, all electrical work must be carried out by a licensed electrician.
Warning:
Ensure the power supply to the exhaust fan is switched OFF before carrying out any
installation and maintenance.
Note:
A double pole disconnection mechanism must be incorporated in the fixed wiring of the
exhaust fan.
INSTALLATION
Fig. 4
WALL INSTALLATION
1.Find a suitable location and cut the appropriate size (150mm). Ensure there are no cables or
pipes behind the wall when cutting. The hole should slope slightly to the external wall, this will
allow drainage of any ingress from rain.
2.Remove the front panel of the exhaust fan and position against the wall, and mark the four
fixing screw points and cable entry, and then drill to suit.
3.Place the exhaust fan through the cut out hole and position in place.
4.Connect the Live and Neutral supply wiring to the terminal block, replace the terminal
block cover and secure with screws.
5.Secure the fan to the wall via the four screws and mounting holes.
6.Replace the front panel and external shutter (External shutter not supplied).
Warning:
For your safety, all electrical work must be carried out by a licensed electrician.
Warning:
Ensure the power supply to the exhaust fan is switched OFF before carrying out any
installation and maintenance.
Note:
A double pole disconnection mechanism must be incorporated in the fixed wiring of the
exhaust fan.
INSTALLATION
Fig. 4
WALL INSTALLATION
1.Find a suitable location and cut the appropriate size (150mm). Ensure there are no cables or
pipes behind the wall when cutting. The hole should slope slightly to the external wall, this will
allow drainage of any ingress from rain.
2.Remove the front panel of the exhaust fan and position against the wall, and mark the four
fixing screw points and cable entry, and then drill to suit.
3.Place the exhaust fan through the cut out hole and position in place.
4.Connect the Live and Neutral supply wiring to the terminal block, replace the terminal
block cover and secure with screws.
5.Secure the fan to the wall via the four screws and mounting holes.
6.Replace the front panel and external shutter (External shutter not supplied).
Warning:
For your safety, all electrical work must be carried out by a licensed electrician.
Warning:
Ensure the power supply to the exhaust fan is switched OFF before carrying out any
installation and maintenance.
Note:
A double pole disconnection mechanism must be incorporated in the fixed wiring of the
exhaust fan.
INSTALLATION
Fig. 4
WALL INSTALLATION
1.Find a suitable location and cut the appropriate size (150mm). Ensure there are no cables or
pipes behind the wall when cutting. The hole should slope slightly to the external wall, this will
allow drainage of any ingress from rain.
2.Remove the front panel of the exhaust fan and position against the wall, and mark the four
fixing screw points and cable entry, and then drill to suit.
3.Place the exhaust fan through the cut out hole and position in place.
4.Connect the Live and Neutral supply wiring to the terminal block, replace the terminal
block cover and secure with screws.
5.Secure the fan to the wall via the four screws and mounting holes.
6.Replace the front panel and external shutter (External shutter not supplied).
Warning:
For your safety, all electrical work must be carried out by a licensed electrician.
Warning:
Ensure the power supply to the exhaust fan is switched OFF before carrying out any
installation and maintenance.
Note:
A double pole disconnection mechanism must be incorporated in the fixed wiring of the
exhaust fan.
INSTALLATION
Fig. 4
WALL INSTALLATION
1.Find a suitable location and cut the appropriate size (150mm). Ensure there are no cables or
pipes behind the wall when cutting. The hole should slope slightly to the external wall, this will
allow drainage of any ingress from rain.
2.Remove the front panel of the exhaust fan and position against the wall, and mark the four
fixing screw points and cable entry, and then drill to suit.
3.Place the exhaust fan through the cut out hole and position in place.
4.Connect the Live and Neutral supply wiring to the terminal block, replace the terminal
block cover and secure with screws.
5.Secure the fan to the wall via the four screws and mounting holes.
6.Replace the front panel and external shutter (External shutter not supplied).
5. Secure the fan to the wall via the four screws and mounting holes and /or using the fixing
arms located on the side of the exhaust fan spigot.
6. Replace the front panel and external shutter (External shutter not supplied).
