Place floors on a firm and level base, ensure base has suitable
drainage free from areas where standing water can collect. (See
front page on base requirements).
Place floors flush against each other and fix together using 4 x
50mm screws , alternate fixing positions along the length of the
floors.
Step 3
50mm
screw
10 x 50mm screws
8
Fit the mortice lock into the recess and fix in place with the screws
provided. Fit the key plate using the screws provided.
Fix door handles using 8x30mm screws.
Then fit barrel bolts to top and bottom of the doors as shown in
diagram. Use 4x10mm screws per barrel bolt.
Ensure doors open and close freely.
Step 2
30mm
screw
10mm
screw
10mm
screw
31
31
28
3
4
32
33
The Mortice Lock is Reversible
Step 4
Place Back Panel 2
on top of floor as
shown.
Pre-drill 3 holes
from Back Panel 2
and into Rear
Panel Framing
and attach
together using 3 x
50mm screws.
50mm
screw
3 x 50mm screws
6
14
Step 5
Place Back Panel 1
up against Rear
Panel Framing, pre
drill 3 holes and fix
together using 3 x
50mm screws.
Fix the other 2
Panel Frames to
the ends using the
same method
ensuring to pre drill
holes first.
50mm
screw
9 x 50mm screws
5
25
10
