19_J05xxx_ SPB 358 E&C.indd 14
9/1/19 5:10 PM
Caution:
The default time zone of the clock module is set at UTC+8, and the
working time is from 7:00 am to 7:00 pm daily.
Caution:
When setting the numeric values, the first two digits of the nixie
start to flicker.
5.2
Functions of the buttons on the clock module
K
1
: To select the mode.
K
2
: To enter the mode or confirm the numeric value input.
K
3
: To adjust the numeric value.
Press K
1
for around 2 seconds to activate the mode selection. Continue to press
K
1
shortly to select the specific mode from P
1
to P
4
. Enter K
2
to confirm the
selected mode, and the digital screen will start to flicker waiting for the numeric
value input. Press K
3
to enter the numeric value of you desired to key in, and
then press K
2
to confirm the values input.
14
