background image

Introduction 

 

MANN+HUMMEL Industrial Filtration 

 

1

 

Introduction 

These installation and maintenance instructions form part of the scope of delivery. They must 
remain easily accessible through the entire life cycle of the product.  
We reserve the right to change the designs outlined in these installation and maintenance 
instructions as a result of further technical developments. 
Reprinting, translation and any type of reproduction, in whole or as extracts, require written 
approval from the originator. 
Copyright is retained by the originator. 
These installation and maintenance instructions are not covered by any amendment service. 
The latest version at any time can be obtained from the manufacturer. 

1.1 

Manufacturer and originator 

MANN+HUMMEL GmbH 
Business Unit Industrial

 

Filtration 

Brunckstraße 15 
67346 Speyer 
Fon: +49 (62 32) 53-80 
Fax:       +49 (62 32) 53-88 99 
 
Internet: www.mann-hummel.com 
E-Mail:   [email protected]

 

1.2 

Guarantee and warranty 

Information on warranty periods and general terms and conditions are available from the 
manufacturer or under www.mann-hummel.com. 
 
The guarantee and warranty cease to apply if: 

– 

the product is changed without the manufacturer’s approval. 

– 

the installation and maintenance instructions are not adhered to. 

– 

spare parts and accessories other than those supplied or approved by the 
manufacturer are installed and removed. 

– 

the product is improperly handled. 

1.3 

Disclaimer 

This manual is intended as a guide only; the manufacturer cannot be held responsible for the 
performance of this product in its final application of which it has no control. The user must 
satisfy themselves that the product is suitable for the application by their own testing and 
approval in that application. Therefore the manufacturer cannot be held responsible for 
equipment failure, damage or personal injury due to the product failure in the application. 

 

 

Содержание 1001508S01



















Отзывы: