Mankati Fullscale XT, Руководство пользователя

Страница: 27 / 50

www.mankati.com
25
Quality
Initial layer thickness:
Layer thickness of the bottom layer. A
thicker bottom layer makes sticking to the bed easier. Set 100
means setting the bottom thickness the same as other layers.
Initial layer flow:
The extrusion capacity when printing the
bottom layer.
Cut off object bottom:
Sinks the object into platform, this can be
used for objects that do not have a flat bottom or cutting off the
already finished model height in order to stick or montage with
other parts easily.
Continue print from cut off:
Continue print from cut off. The
print will first raise the nozzle to the height, then continue print
the object left last time.
Note: when select this function, should disable brim,
raft and skirt features at the same time.
Speed and Temperature
Travel Speed:
Moving speed without printing.
Usually setting at 80 is the best choice, also can reach speeds
of 150mm/s at most. But it may cause the motor stop missing
problem.
Bottom layer speed: The bottom print speed. Recommended
20, set as 0 means the same as other layer. Reducing the bottom
layer speed can help model stick more closely to platform.
Outer shell speed: Speed at which outer shell is printed. If set to
0 then the print speed is used. Printing the outer shell at a lower
speed improves the final skin quality. However, having a large
difference between the inner shell speed and the outer shell
speed will effect quality in a negative way.
Parameter Definition
Inner shell speed:
Speed at which inner shells are printed. If set
to 0 then the print speed is used. Printing the inner shell faster
than the outer shell will reduce printing time. It is good to set
this somewhere in between the outer shell speed and the infill
printing speed.
Infill speed:
Speed at which infill parts are printed. If set to 0
then the print speed is used for the infill. Printing the infill faster
can greatly reduce printing time, but this can negatively effect
printing