If pairing has been carried out successfully, a prompt sound is heard
,
meanwhile, the “bT” symbol stops
flashing.
5. After connection is complete, you can listen to music wirelessly through Bluetooth and select music
in Bluetooth device.
6. Press “+”/ “–” button to raise/lower the volume level.
7. To disconnect the Bluetooth function, switch to another function on the unit or disable the function
from your Bluetooth device.
Tips:
1. If a mobile phone on which you are playing music receives a call, the music will be interrupted. The
sound however is not played back via the speaker. After you have ended the call, the devices are
connected to each other again and playback continues.
2. If there is an existing connection, press and hold the button on the remote control for 3 seconds to
break the current connection and initiate pairing mode
3. The player will also be disconnected when your device is moved beyond the operational range. If you
want to reconnect your device to this player, place it within the operational range.
4. If the device is moved beyond the operational range, when it is brought back, please check if the
device is still connected to the player.
5. If the connection is lost, follow the instructions above to pair your device to the player again.
OPTICAL/COAXIAL (DIGITAL INPUTS) OPERATION
1. Ensure that the unit is well connected to the TV or other audio device via Optical cable (included) or
Coaxial cable (excluded).
2. While in Power On mode, press the
/SOURCE button on the main unit or remote control to select
the OPTICAL or COAXIAL mode
.
3. Operate your audio device directly for playback features.
Note: If there is no sound coming out from the sound bar and the status indicator light flashes quickly,
make sure the audio (digital output) setting of your source player (e.g. TV, DVD player, game player) is
set to PCM.
3.5MM AUX INPUTS OPERATION
1. Ensure that the unit is well connected to the TV or other audio device via a 3.5mm audio cable (not
included).
2. While in Power On mode, press the
/SOURCE button on the main unit or remote control to select
the AUX input mode.
3. Operate your audio device directly for playback features.
USB PLAYBACK
1.
While in Power On mode, press the
/SOURCE
button on the main unit or remote control to select
the USB mode.
2.
Connect a USB storage device directly into the port, after a few seconds, it will start music playback
automatically.
3.
Press the " " or "
" button on remote control to skip to the previous or next track
Note:
